W5600X Maintenance FAQ: Pads, Spray, Cables and Storage

For routine W5600X maintenance, inspect the pads, empty the reservoirs before storage as the manual instructs, and check the power cable and safety rope for damage. Retrieve the robot before powering down and disconnecting it for maintenance. Keep water away from electrical areas and use the care method supplied with your exact unit.

Use this FAQ to choose the next check. The linked guides explain individual procedures; this page does not provide internal repair instructions or a fixed replacement schedule.

Which care guide should I use?

How often should I wash the pads?

Inspect them after each cleaning session and during use if they start spreading residue. Wash a dirty pad by its approved care method. Check the cleaning face and attachment area before fitting it again.

Replace a pad if embedded grit remains after washing, the fabric is damaged, or the pad no longer sits flat and holds as designed. A calendar interval cannot account for differences in dirt, use and pad condition. Do not invent a machine-wash setting or detergent choice when the pad instructions do not specify one.

Should I leave water in the tanks?

The W5600X manual instructs you to pour water out of the reservoirs before storage. Follow its draining method and keep spills away from the controls, underside and power connections. Secure the reservoir plugs as instructed before the next use.

Do not apply W5600X tank-care instructions to another model without checking that model's manual.

Does weak spray mean the nozzle needs a needle?

No. Check the water level and spray setting before treating an outlet as blocked. Inspect the visible opening with the robot off the glass and disconnected from power. Do not push a needle into the outlet or open the atomizer unless the exact manual supplies that procedure.

Use the water type permitted by the W5600X instructions. Do not add vinegar, descaler or another treatment based on advice for a different appliance. Contact support if the approved checks do not resolve the problem.

Can I rinse the robot under a tap?

Do not immerse the machine or spray liquid onto it or its base. Follow the approved exterior-cleaning method and keep liquid away from electrical areas. A removable cleaning cloth's washing instructions do not apply to the robot body.

If water has reached a power connection, leave the robot disconnected and ask for model-specific support before using it again.

What damage means I should stop using it?

Stop if you find exposed conductors, a crushed or heat-damaged cable, a loose or wet connection, cuts in the safety rope, or damaged attachment hardware. Do not tape a damaged cable and return it to use. Arrange an approved replacement or authorized service.

W5600X uses plug-in power for normal cleaning. UPS protection provides temporary help after an unexpected power interruption; it does not replace a sound power connection, the safety rope or supervision.

How should I store it until the next use?

Pack the robot only when it is powered off, disconnected and dry. Wash and dry used pads, drain the reservoirs as instructed, and keep the cable loosely coiled without sharp bends. Inspect and dry the safety rope before storing it with the robot.

Choose a dry indoor location where heavy objects cannot press on the controls, connectors or spray outlets. Keep clean pads separate from used ones. Before returning to the glass, use the pre-cleaning checklist; storage does not replace inspection.

Can I use parts from another Frewico model?

Check the exact accessory listing for your model. Similar appearance does not establish fit. The W5600X replacement-parts guide explains what to confirm before ordering.

For a problem that continues after the approved care steps, record the model, the symptom and the checks you have completed. Share clear photos with Frewico support rather than opening the machine. Keep the manual supplied with your unit alongside the current W5600X product information.